WQX-D3 玻璃高速清洗干燥機

產品特性：

1.主傳動為齒輪傳動，變頻調速，數字顯示，清洗部分毛刷輥轉動分別由上、下兩組電機單獨皮帶傳動，其轉速平穩，使用壽命長.

2.清洗部分和風干部分整體升降，？升程:400mm,便于清潔和保養.（下升降式）

3.三對毛刷配置，可洗low-e玻璃，普通鍍膜和陽光鍍膜玻璃.

4.三對風刀配置〈二直一斜結構〉、風力大、風干效果好，且大風機帶風加熱.

5.鋁合金拼裝式結構，所有護罩、鈑金、膠輥軸頭、毛刷軸頭及與水接觸的緊固件均為SUS304材質.

Product characteristics:

1. The main drive is gear drive, frequency conversion speed regulation. The digital display shows that the brush rollers of cleaning part rotate independently by the upper and lower two groups of motors. The speed is stable and the service life is long.

2. The cleaning part and the wind cadres are lifted and lowered as a whole. The maximum lift is 400 mm, which is convenient for cleaning and maintenance.

3. Three pairs of brushes, washable LOW-E glass, ordinary coated glass and sunlight coated glass.

4. Three pairs of wind knives are equipped with "two straight and one inclined structure". The wind is strong and the air drying effect is good, and the large fan is heated with air.

5. Aluminum alloy assembling structure. All shields, sheet metal, cot axle heads, brush axle heads and fasteners in contact with water are SUS304 materials.

?

主要技術參數：

Main technical parameters:

?

?

產品不斷改良，當外型與參數變更時，均以實樣為準，恕不另行通知.

The product is continuously improved. When the appearance and parameters are changed,

the actual sample is taken as the standard, and no further notice is given.